Dellorto 21mm Carb - Page 5

70RSMAT · 28-07-10, 12:59 PM

Originally Posted by nos burner

lol Italian piece of gash jap performance is made of win

an rs125 would piss all over your NSR lol

mcglynn · 28-07-10, 03:19 PM

yeh mate, fuse was checked, i think the coil has arced, so new cdi just

got a starter motor cheap aswell, so i mightnt be getting riid, and nsrs are outdated pieces of shit lol

nos burner · 29-07-10, 08:21 PM

Originally Posted by 70RSMAT

an rs125 would piss all over your NSR lol

but at least my nsr would make it home and not blow up after 5 minutes

Andy_Edw · 29-07-10, 10:31 PM

Originally Posted by nos burner

but at least my nsr would make it home and not blow up after 5 minutes

doubt it...

mcglynn · 29-07-10, 11:14 PM

my rs50 makes it home too, and has never blown up on me. ul

nos burner · 30-07-10, 09:50 AM

Originally Posted by Andy_Edw

doubt it...

you do realise the nsr uses better quality parts than aprilia and better prices

nos burner · 30-07-10, 09:52 AM

Originally Posted by mcglynn

my rs50 makes it home too, and has never blown up on me. ul

you have a 50 we were on about 125 if you read mats post and how is it out dated lol so your calling max's r6 an outdated piece of shit? considering they look pretty similar

mcglynn · 30-07-10, 02:48 PM

not about looking pretty similiar, i hear of r6's all the time, nsrs are a lot more unheard of. their shite.

Andy_Edw · 30-07-10, 03:02 PM

Originally Posted by nos burner

you do realise the nsr uses better quality parts than aprilia and better prices

w.e, I'm not going to argue about it.

nos burner · 30-07-10, 07:38 PM

Originally Posted by mcglynn

not about looking pretty similiar, i hear of r6's all the time, nsrs are a lot more unheard of. their shite.

they stopped producing the nsr in 2001 :S that doesn't make them shite they just didn't want to have to start all the emissions crap like the rs125 has with all the cats etc.. i would choose a nsr over a rs anyday, it sounds alot better than a rs and theres not much in it as they both produce near enough the same amount of power..

im bored of arguing with you now im going to get laid instead KTHXBI

MasterTenerife · 30-07-10, 08:32 PM

Originally Posted by nos burner

im bored of arguing with you now im going to get laid instead KTHXBI

Friday night innit

rs50-hayden · 14-08-10, 06:20 PM

Could you please send me the part numbers or links to the needle spring and collett as my carb is missing the exact same parts as yours was, its a bit weird how I have the same filter aswell did you buy it off ebay by any chance?

mcglynn · 15-08-10, 12:04 PM

yeah i got it off ebay. He took the parts from your carb and gave me them i think, as it was listed as all there and he sent me it without them, so he took them off and posted me them.. go to dellorto.co.uk and search phbg parts then find them in there, write the numbers down and phone them and enquire..

rs50-hayden · 16-08-10, 10:00 PM

The cheeky bugger lol! although I did save £17 which should hopefully be enough for the parts, i'll give dellorto a ring in a couple of days cheers mate

28-07-10, 12:59 PM	#61
70RSMAT Garage Owner Join Date: Dec 2008 Location: Grimsbay Posts: 1,798	Originally Posted by nos burner lol Italian piece of gash jap performance is made of win an rs125 would piss all over your NSR lol __________________

28-07-10, 03:19 PM	#62
mcglynn Junior Mechanic Join Date: Mar 2010 Posts: 380	yeh mate, fuse was checked, i think the coil has arced, so new cdi just got a starter motor cheap aswell, so i mightnt be getting riid, and nsrs are outdated pieces of shit lol Last edited by mcglynn; 28-07-10 at 03:26 PM.

29-07-10, 08:21 PM	#63
nos burner My Aprilia Is Awful Join Date: Dec 2009 Location: Cheltenham Posts: 1,735	Originally Posted by 70RSMAT an rs125 would piss all over your NSR lol but at least my nsr would make it home and not blow up after 5 minutes __________________

29-07-10, 10:31 PM	#64
Andy_Edw Junior Mechanic Join Date: May 2010 Posts: 233	Originally Posted by nos burner but at least my nsr would make it home and not blow up after 5 minutes doubt it... __________________ Aprilia RS125 2008 FP . Tail tidy . Double bubble black front screen . Black headlight covers . Quick Realse fuel cap . Stainless steel Aprilia Heel Guards . Carbon fibre yoke Cover . 7BY5 Numberplate . Arrow Race exhaust . Red rim tape . Renthal Sprockets . RK Red chain . R&G Barends . Evotech exhaust hanger .

30-07-10, 09:50 AM	#66
nos burner My Aprilia Is Awful Join Date: Dec 2009 Location: Cheltenham Posts: 1,735	Originally Posted by Andy_Edw doubt it... you do realise the nsr uses better quality parts than aprilia and better prices __________________

29-07-10, 11:14 PM	#65
mcglynn Junior Mechanic Join Date: Mar 2010 Posts: 380	my rs50 makes it home too, and has never blown up on me. ul

30-07-10, 09:52 AM	#67
nos burner My Aprilia Is Awful Join Date: Dec 2009 Location: Cheltenham Posts: 1,735	Originally Posted by mcglynn my rs50 makes it home too, and has never blown up on me. ul you have a 50 we were on about 125 if you read mats post and how is it out dated lol so your calling max's r6 an outdated piece of shit? considering they look pretty similar __________________ Last edited by nos burner; 30-07-10 at 10:23 AM.

30-07-10, 02:48 PM	#68
mcglynn Junior Mechanic Join Date: Mar 2010 Posts: 380	not about looking pretty similiar, i hear of r6's all the time, nsrs are a lot more unheard of. their shite.

30-07-10, 03:02 PM	#69
Andy_Edw Junior Mechanic Join Date: May 2010 Posts: 233	Originally Posted by nos burner you do realise the nsr uses better quality parts than aprilia and better prices w.e, I'm not going to argue about it. __________________ Aprilia RS125 2008 FP . Tail tidy . Double bubble black front screen . Black headlight covers . Quick Realse fuel cap . Stainless steel Aprilia Heel Guards . Carbon fibre yoke Cover . 7BY5 Numberplate . Arrow Race exhaust . Red rim tape . Renthal Sprockets . RK Red chain . R&G Barends . Evotech exhaust hanger .

30-07-10, 07:38 PM	#70
nos burner My Aprilia Is Awful Join Date: Dec 2009 Location: Cheltenham Posts: 1,735	Originally Posted by mcglynn not about looking pretty similiar, i hear of r6's all the time, nsrs are a lot more unheard of. their shite. they stopped producing the nsr in 2001 :S that doesn't make them shite they just didn't want to have to start all the emissions crap like the rs125 has with all the cats etc.. i would choose a nsr over a rs anyday, it sounds alot better than a rs and theres not much in it as they both produce near enough the same amount of power.. im bored of arguing with you now im going to get laid instead KTHXBI __________________

30-07-10, 08:32 PM	#71
MasterTenerife Senior Mechanic Join Date: Dec 2009 Location: Tenerife, Canary Islands. Posts: 1,822	Originally Posted by nos burner im bored of arguing with you now im going to get laid instead KTHXBI Friday night innit __________________

14-08-10, 06:20 PM	#72
rs50-hayden Newbie Join Date: Mar 2010 Location: staffordshire Posts: 43	Could you please send me the part numbers or links to the needle spring and collett as my carb is missing the exact same parts as yours was, its a bit weird how I have the same filter aswell did you buy it off ebay by any chance? __________________ Rs50 2001 project Parts needed : Lock set, Screen, performance exhaust. Selling: rs 125 rear wheel. [SIGPIC]

15-08-10, 12:04 PM	#73
mcglynn Junior Mechanic Join Date: Mar 2010 Posts: 380	yeah i got it off ebay. He took the parts from your carb and gave me them i think, as it was listed as all there and he sent me it without them, so he took them off and posted me them.. go to dellorto.co.uk and search phbg parts then find them in there, write the numbers down and phone them and enquire..

16-08-10, 10:00 PM	#74
rs50-hayden Newbie Join Date: Mar 2010 Location: staffordshire Posts: 43	The cheeky bugger lol! although I did save £17 which should hopefully be enough for the parts, i'll give dellorto a ring in a couple of days cheers mate __________________ Rs50 2001 project Parts needed : Lock set, Screen, performance exhaust. Selling: rs 125 rear wheel. [SIGPIC]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Message From TJ Tuning :

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode